過濾設備的英文

㈠ 化工設備壓濾機掛牌用什麼英文字母代替

一般會用，FP來表示。
filter press，就是壓濾機的英文。
也有企業用自己的設備代碼做表示的，比如8888號設備。

㈡ 幫忙翻譯，英文——中文

Residential onsite wastewater treatment：
住宅附近污水處理方法：化糞池污水處理的設計和安裝
Jan R. Hygnstrom, Extension Project Manager 簡.R.海金斯卓穆，總項目負責人
Sharon O. Skipton，Extension Ecator
沙龍.O.斯格普頓， 教育學家
Wayne E.Woldt，Extension Specialist
韋恩. E.沃爾德，專家
This NebGuide provides information on septic wastewater tank installation, such as selecting the correct tank size and placement and installation proceres used by installation professionals.
Neb說明書提供關於化糞污水池安裝的相關信息，例如：池子大小尺寸的選擇，場地的選擇，
及用於專業安裝的步驟。
Figure 1：圖1：
Inspection pipe——觀測管道
Manhole——檢修孔（人可以出入檢查的孔）
Riser——冒口（冒渣口）
Inlet baffle or tee——入口伐門
Scum——浮渣
Liquid——液體
Sludge——淤泥
Outlet baffle or tee——出口伐門
A properly designed, installed and maintained septic tank and effluent treatment system is an approved method of wastewater treatment in Nebraska for private residences in areas where public wastewater treatment systems are not available. The system includes the building sewer line (which starts 30 inches from the house and extends to the septic tank), the septic tank, the effluent treatment component, and all piping in between. A drainfield, also known as a lateral, leachfield or soil absorption field, is most commonly used for effluent treatment. Alternative effluent treatment components may be used. Examples include mounds and constructed wetlands. Where soil has a suitable percolation rate and other site conditions are appropriate, the septic tank/drainfield system is a good choice, and the most commonly used.
為居住在內布拉斯加州公共污水處理方法無法處理的地方的每個居民提供設計、安裝、維修完備的化糞池及有效處理系統時一種可行的方法。此系統包括建築污水管道（其起於距離房屋30英尺處，延伸到化糞池），化糞池，有效地處理設備以及全部的連接管道。施灌系統，即側面瀝濾場或過濾帶， 常被用於有效的污水處理。也有可能使用可變更有效污水處理設備。樣本包括護提和建築濕地， 這種地有著合適的過濾比例，而且其他條件也很合適，化糞池/施灌系統一種很好的方法，並且同時也是一種常用方式。

時間有限，所以僅翻譯了這部分，希望能滿意。如需要更多翻譯，請下次註明，或者給我留言，我會在這幾天內給您翻譯好！

由於這是本人親自翻譯的，花費時間和精力，希望大家不要COPY!!!!要想翻譯，請自己做！

㈢ 譯成英文

Nine, electrical control system
1, the overall requirements
A, electrical control using zoning of centralized control mode, namely before treatment, paint, set catenary, electrophoresis, and after washing and drying cabinet curing controller, etc.
B: a power distribution, by users, secondary distribution is responsible by the supplier.
C, electrophoresis with all the electrical control cabinet, stop switch. / state indicator.
D: when the alarm functions, system in operation process, once appear abnormal condition, alarm system, and to start automatically acousto-optic form hint on site working staff which equipment malfunction, then guide.
E, all operating position with tight stop button, guarantee in emergency, emergency stop all work, prevent serious accidents occur.
F, other did not meet the new national standard that place.
2 and the concrete implementation mode control
A, electrophoresis, and after rinse cabinet: electrophoresis silicon rectifier voltage isolator, three-phase 380V input. Rectifier voltage output: DC 250V 0-0, current DC 250A adjustable.
B, catenary conveying system and power lines and spray cabinet: control circuit apart installation, all operating location has stopped/button, catenary line running newspaper alarm set.
C, drying cabinet for the temperature control, drying furnace temperature (such as the temperature of measuring and controlling function, drying furnace temperature control accuracy ± 5 ° c. After unloading and temperature of motor, audio, finded light alarm functions, can be found fault handling.
3 and reliability measures
1), adopts advanced technology.
2), the key points of the temperature sensor adopts prepared. Quantity
3), a full set of equipment, electrical components selection of domestic manufacturers. Fixed-point
Twelve, coating line installation acceptance requirements
(1), pretreatment devices
1 the view: the structure and appearance consistent, no mechanical bruising, smooth, colour and lustre is uniform.
2 A: sex can satisfy requirement of advanced technology, craft parameter, reasonable structure, convenient maintenance, emission reaches the national standards.
B. the spray pump, stable filters etc.
C. the Chambers, tub, piping and equipment all system without leakage.
D. equipment operation 85dB acuities noise.
(2), drying oven
1 the view: smooth, colour and lustre is uniform.
2 A: sex can satisfy equipment parameters requirements.
B. temperature controlled, adjustable, automatic constant.
C. workpiece, temperature drying not more than 5 degrees Celsius (±.
D. heating system USES natural gas heating.
E. insulation USES density for 100Kg/m3 quality cotton, insulation thickness is 150mm.
(3) paint spraying system
1 the view: the reasonable structure, close to beat, overall, no mechanical bruising, colour and lustre is uniform.
2 A: sex can satisfy equipment parameters requirements.
B. mist processing system stable operation.
C. equipment operation 85dB acuities noise.
(4) flow flat room
1 the view: the reasonable structure, compact, the overall level, no mechanical bruising, colour and lustre uniform.
2 A: sex can satisfy equipment parameters requirements.
B. coping with exhaust emissions.
(5) cathode electrophoresis system
1 the view: the reasonable structure, compact, the overall level, no mechanical bruising, colour and lustre uniform.
2 A: sex can satisfy equipment parameters requirements.
B. electrophoresis paint, coating thickness superior equipment.
C. equipment operation 85dB acuities noise.
(6) suspension conveyor chains
1 the view: the standard type, XT100 appearance, color according to regulations.
2 A: sex can run speed range, meet the technological requirements for 0.5-2.5 m/min, satisfy the proction line.
B. catenary runs smoothly, without any crawling jitter phenomenon.
(7) electrical control system
Specifically, the detailed rules for the implementation of the project and the inspection in accordance with the electric control system design requirements.
(8) the acceptance of the coating related standard reference instries and enterprises, to meet customer requirements.

14 and coating technology service and after-sales service content and measures (limited domestic)
1 party a and party b is responsible for provide instructions and related software material.
2 for one year, warranty, proct, proct components ring the warranty period if quality problems, if party a, party b is responsible for repair kit for responsibility.
3, visit user, site equipment related matters.
4 party b to provide technical guidance services. The equipment,
5 party b for user training coating line, on-job operators can master trainers, adjustment and the basic operation maintenance ability.

希望對你有幫助

㈣ 多介質過濾器 英文翻譯

Multi-medium filter

㈤ 有關過濾器規格的翻譯

Cartridge Element - Vertical Type
濾芯元件 ---- 豎式

㈥ 請高手幫忙翻譯英語

Machining process and general information:
機加工工藝和一般信息：
• General Information – Tooling
•一般信息－刀具
o Plan to have own engineering group as company expands
o 隨著公司的發展擁有自己工程集團的計劃
o Hwasung is subcontracted to do engineering currently
o 目前韓國Hwasung公司分包工程
o Uses same cutting tools as in Korea facility – all diamond
o 使用與在韓國設備一樣的切屑工具－全鑽石
o Regrind tools if can
o 如果可以，再研磨刀具
o Hwasung has capability to surface grind, repair dies, and make molds with wire EDM
process
o Hwasung公司有能力進行表面研磨、修理模具和用電火花線切割工藝製作模具
• General Information – Machining
•一般信息－機械加工
o Boundary samples are used: okay, borderline, not good
o 採用邊界樣本：好，臨界，不好
o Quality room has separate windows for incoming and outgoing parts (for quality
checks)
o 質量室有用於進廠和出廠零件的分開的窗口（用於質量檢查）
o New equipment will be coming in from FM LaGrange plant
o 新的設備將從FM LaGrange工廠引進
o Each operation has pictures and job instructions for what to check and which gage to
use to check part
o 每一項操作都有用於檢查的內容和用什麼量具來檢查零件的照片和作業指導。
o Parts are manually loaded into machine or pallet, depending on line
o 零件根據生產線用手動裝載到機器或托盤上
o Auditor checks parts for verification: after operator checks part, puts in bin, auditor
checks part and reloads back on line
o 檢查員檢查用於驗證的零件：在操作人員檢查零件後，放入料箱，
檢查員再檢查零件，並重新裝回生產線
o Have tool management system
o 有刀具管理系統（制度）
o A pokeyoke check is used for orientation prior to loading
o 採用一項防錯（pokeyoke）檢查用於裝到機器上前的定向
o Machines are guarded
o 機器是加防護的
o Mostly have CNC machines
o 大多數有CNC（計算機數控）機器
o Manual chip collection systems
o 人工的碎屑收集系統
o If automated, have robots with grippers to load/unload parts from pallets
o 如果是自動的，那麼有帶機械爪的機器人來從托盤裝載/卸載零件
o After final inspection, operator visually inspects and loads onto plastic nnage with
the crown up and loads into the washer
o 在最後檢驗後，操作人員目測檢驗，並頂部向上裝到塑料襯墊上，並裝載進清洗機
o Repairs: filing down of burrs or sharp edges after anodizing the crown
o 修理：在將頂部樣機氧化後，銼削掉毛刺或尖銳的邊緣
o Have 2 Excello machines for special machining of the pin bores
o 有兩台Excello的機器用於銷孔的專門機械加工
o 2.7% scrap for gasoline pistons
o 汽油活塞2.7％的廢料
o Cycle time is 18 seconds for gasoline piston
o 汽油活塞的周期時間是18秒
o Process – Wash
o 清洗過程
o Spray system
o 噴淋系統
o 4 stations: heated wash, wash with degreaser, 2 rinse stations
o 4站：加熱清洗，用去油污劑清洗，兩個漂洗站
o Uses RO water
o 採用反滲透（RO）水
o Operator blow dries piston and puts on nnage with crown up
o 操作人員吹風使活塞乾燥，並頂朝上放到襯墊上
o Parts wheeled into coating room
o 零件經輪子傳送進塗覆間
o Needs major improvements here
o 這里需要重大的改進
o Chemical analysis done for bath in chemical room
o 對化學間中的塗液（槽浴）進行化學分析
o Comments/Observations:
o 評論和觀察：
o Relatively small piston facility, but plans for additional space. New facility,
July 2004.
o 相對較小的活塞設備，但是計劃增加額外的空間。新的設備，2004年7月
o Currently no cleanliness checks (wash and filter) run to verify machining wash
process.
o 目前沒有進行清潔度檢查（清洗和過濾）來驗證機加工的清洗過程
o No asm processes / equipment at facility.
o 在工廠設施處沒有ASM（active shape models主動形狀模型）工藝/設備
o Current wash process / equipment / clean part handling would not meet GM
requirements
o 目前的清洗過程/設備/清潔零件的裝卸不能滿足GM（通用汽車）的要求
o Could not fully review coating process e to no proction at the time of the
visit.
o 由於參觀時沒有生產，所以沒能完全看到塗覆工藝過程

㈦ 機械英語，求翻譯。

三、設備結構：
Three, equipment structure:

機器主要包括如下設備（如圖）
The machine mainly includes the following equipment (pictured)

1.主機（擠出機）
1. The host (extruder)

包括傳動部分、機筒和螺桿、機筒加熱器等組成。
Including the transmission part, barrel and screw, machine tube heater etc.

2.機頭
2. Head

主要由連接器（包括過濾部分）、支管、模頭（膜寬度調節及擠出膜厚度調節）及機頭加熱器等組成。
Mainly by the connector (including filter part), tubes, die (film width adjustment and extrusion film thickness regulation) and head heater etc.

復合機機頭溫度很高，一般為300～350℃。
Compound machine with high temperature, generally for 300 ~ 350 ℃.

3.放卷裝置：
3. The cloth-extending system:

放卷裝置為固定單軸型和固定雙軸型，根據實際情況合理配置。
The cloth-extending system for a single fixed axis type and fixed al axle type, according to the actual situation of the reasonable configuration.

4.復合裝置：
4. Composite device:

復合裝置主要包括兩只硅橡膠壓輥、施壓冷卻鋼輥、冷卻鋼輥、兩只剝離冷卻輥、液壓系統和冷卻循環系統等組成。
Composite device is mainly include two silicon rubber roller, pressure roller, cooling steel cooling steel roller, two stripping cooling roller, hydraulic system and cooling circulation system, etc.

5.切邊裝置：
5. Trimming device:

主要由刀架和刀片組成。
Mainly by the knife blade and composed.

6.卷取或打孔、折邊、裁切裝置。
6. Winding or punching, ruffled, cutting device.

6a. 卷取裝置主要由卷取輥、傳動部分和力矩電機組成。
6 a. Coiling device mainly by the winding roller, transmission parts and torque motor composition.

6b. 打孔、折邊、裁切
6 b, punching, ruffled, cutting

6b.1打孔裝置主要由可以上下移動的打孔針軸和下面固定的氯丁橡膠輥組成。
6 b. 1 holing can move up and down by device is mainly of holing needle axis and the fixed neoprene roller composition.

6b.2折邊裝置主要由內導架和彈性壓條組成。
6 b... 2 ruffled device is mainly by inside the frame and elastic layering composition.

6b.3裁切裝置主要由牽引輥、裁切刀架、刀片、交換齒輪及傳動系統等組成。
6 b. 3 cutting device is mainly by drawing roller, cutting knife, knives, exchange and transmission gear system, etc.

㈧ 翻譯為英文

Project number provided
Number of ways
A pre-treatment spray
L28400 × W1200 × H3800 (mm) HDTZ 1 sets
A spray chamber body of a Taiwan
2, 9, Taiwan Liquid Tank
3 spray pumps and piping 9 sets
4 exhaust pipe 2 sets of machines and
5 phosphate precipitation Tower 1 units
6 heat sink body of a Taiwan
7, 2 sets of plate heat exchanger tank
8 groove plate heat exchanger 1 set
9, 10 sets of nozzles
10 sets of 10 spray pipe
10 sets of 11 valve flange
1 set of 12 phosphate replacement pump
1 set of 13 hot water circulating pump
14, 1 set of glass fiber reinforced plastic anticorrosion material
15 2 sets of lighting
16 access door and platform 1 set
1 set of 17 automatic degreasing system
1 set of 18 other supporting materials
Two electrophoretic systems HDTZ 1 sets
1 main channel and sub-slot electrophoresis
L8600 × W1300 × H1700 (mm) 1 sets
After the washing chamber 2 swimming body (stainless steel) 1
2 sets of 3 spray pump
2 sets of 4 Spray Liquid Tank
Exhaust Fan and pipe 1 5 sets
6 Rectifier 250V/250A 1 Taiwan
7, plate heat exchanger (20m2) 1 station
8 chillers (100,000 kcal)
(Pumps, piping and valves) 1 set
9 1 station cooling tower
10 water units (1.5T / H)
(RO type) 1
11 ultrafiltration device
(1T / H) 1 set
Cover a set of 12 cathode
13 2 sets of swimming paint filter
After the sprinkler system 14 5 sets of swimming
The main circulation line 15 Red paint 1 set
16 Red paint the main circulating pump DN100 2 sets
1 set of 17 paint device
18 water pumps installed for other
1 set of auxiliary platform 19 electrophoresis
1 set of 20 maintenance platform
21, 1 set of glass fiber reinforced plastic anticorrosion material
1 set of 22 other supporting materials
3 curtain spray booth
L2500 × W2400 × H2600 (mm) HDTZ 4 sets
A spray chamber body 4 sets
2, 4 sets of operating room body
4 sets of 3 Liquid Tank
4 sets of 4 fluid filter
5 curtain device (stainless steel) 4 sets
6, 4 sets of water pumps and piping
7, exhaust fan and the pipe 2 sets
4 sets of 8-retaining flap
9, 4 sets of spray capture device
4 sets of 10 lighting fixtures
4 rack units of 11 sets of wind
4 sets of 12 pipe flange valve
4 sets of 13 st-proof room
4 sets of 14 other supporting materials
Four electrophoretic paint drying furnace
L24500 × W2300 × H2400 (mm) HDTZ 1 sets
1 room 1 unit body
2 sets 1 set
3 hot air circulation fan 1 set
1 set of 4 rock wool insulation
1 set of hot air circulation line 5
6 days gas heater 1 set
7, 1 set of exhaust emission devices
1 set of 8 other support materials
Five paint drying oven
L19500 × W2300 × H2400 (mm) HDTZ 1 sets
6 leveling Room HDTZ 2 sets
1 room 2 sets of body
2 2 sets of exhaust emission devices
3, access door and viewing window 2 sets
7 conveyor (XT100 type) 1 set of Suzhou
A removable chain of about 260m Die
2 250m track
3, drives a station
4 tension device 1 set
5 Furnace 1 set of telescopic rail
6 including 1 set of rack
Seven sets 1 set
8 in 1 set of curved track
9 on track one set of curved arch
10 curved track a set of Bending
1 set of 11 rotating device
1 set of 12 frequency converter
13 slide rack installed for the load
14 empty slide rack installed for
1 set of 15 column
1 set of 16 other supporting materials
Eight sets of electrical control system HDTZ 2
1 pre-treatment spray control cabinet 2 sets
2 2 sets of oven control cabinet
3 hanging chain and spray control cabinet 2 sets
4 CED control cabinet 1 set
5 Department of wire cable tray 1 set
Nine sewage treatment equipment (5m3 / h) 1 sets
10 4 sets of manual painting systems
11 10% spare parts (2 years 3 classes)
12 fire appliances and common tool used
13 Backup Power 50KW 1-Taiwan
14 raw materials for debugging
15 1 set of instrumentation
16 handling equipment, travel,
Forklift and handling equipment
Subtotal
17 design fee
18 Commissioning costs of Installation
19 staff training costs
20 freight (domestic)
The total project cost (capital) ¥:

㈨ 利可多凈水器的英文名稱是什麼

1.浚清公司創立於1982年，為原美國CUNO工業過濾設備代理商。2.自1982至2006年，24年間代理了英國Domnick Hunter (2005年被內Parker並購容)、美國CUNO (2005年被3M並購)，以及日本Daiwabo等國深知名過濾廠牌。27年間浚清完全致力於過濾、凈化系統。3.2004年成立中國維修部於蘇州。4.2006年成立過濾器實驗室。5.2007年自創品牌 - Ricotek。

希望這個答案夠全面能採納。。

㈩ 翻譯設備英語

PLC的輸入
X0 B134感測器旋轉的影響，antuamming
X1 B142 flowswitch flushair，antuamming
x2 s181開關打開DCT的艙口
X3的b118感測器右邊刻度在傳送帶臂
x4 s456開關增加/減少的時間
X5的s457開關調節脈沖時間
x6感測器手爪停止旋轉木馬
x7 b183感測器手爪旋轉木馬，從停止
× 10 s458開關調整暫停時間
X11的s459延長開關時間調整
X12的b122感測器rapidfeed停止前進
x13 b126感測器rapidfeed停止落後偶聯
x14 b127感測器rapidfeed停止落後
x15 s111開關右邊臂的旋轉木馬
x15 s111開關右邊刻度，手臂drillcenter
x15 s111開關順時針旋轉木馬
PLC輸出
Y0的y106 ecl
Ŷ1普遍預計心電圖
y2 y109 drillfeed落後，抗干擾
釔y149 rapidfeed停止落後
y4 150元rapidfeed停止前進
y5的y309套300元聘
游6線300元開放棒夾持k6
游7 y306鬆散爪k7的握棒
延10 y301b右邊刻度- K10的手臂drillecnter
y11 y301a右邊刻度，手臂傳送帶k11
焦油狀殘留物y303b轉盤逆時針旋轉
Y13從y303a順時針旋轉木馬
帥y251a DCT的清潔過濾器1
帥y251b DCT的清潔過濾器2
帥y251c DCT的清潔過濾器3
y17 y101b低氣壓的影響/飼料壓力